How to Set Up the Anchors Away Pirate Ship Water Table
By Official Little Tikes Website | Parent Trusted for Over 50 Years | Published: 2026-10-30
Category: Guías prácticas
Follow this step-by-step guide to assemble your Anchors Away Pirate Ship Water Table. Learn tips to avoid common mistakes and get ready for splashy play fast.
Quick Answer
Assemble your Anchors Away Pirate Ship Water Table in about 30 minutes by following the order: attach the legs, install the water features, then secure the pirate-themed deck and crow's nest. Check each step for common pitfalls like overtightening screws or misaligning the water cannon.
Why Setup Order Matters
This water table has multiple interactive parts—a water cannon, current-maker, and multi-level water channels. Installing them in the wrong sequence can force you to backtrack. The steps below follow the logical build from base to top, minimizing rework.
What You'll Need (Not Included)
You'll need a Phillips-head screwdriver (medium size). A soft cloth or towel under the table during assembly protects the plastic from scratches. No batteries or tools beyond the screwdriver are required.
Step-by-Step Assembly Instructions
- Attach the Four Legs: Insert each leg into the corresponding corner socket on the underside of the table base. Push firmly until you hear a click. Do not use a hammer; plastic can crack. Check that all four legs sit flat on the ground before proceeding. A wobbly table usually means a leg isn't fully seated—reinsert it rather than forcing screws.
- Install the Water Cannon and Current-Maker: Snap the water cannon into the designated slot on the side of the table. Align the current-maker (the spinning wheel) into its housing. Both should rotate freely by hand before you tighten any screws. Overtightening can bind moving parts. Test spin each feature after installation. If it doesn't turn, loosen the screw slightly.
- Secure the Deck and Crow's Nest: Place the deck (the flat play surface) over the base, aligning the tabs with the slots. Press down until it clicks. Attach the crow's nest to the top of the mast post by sliding it down until it locks. Do not force it—if it doesn't slide, check for debris in the channel. The crow's nest should sit level. If it tilts, remove and realign the mast post before locking.
- Add Water and Test: Fill the table with water up to the fill line (usually marked inside). Do not exceed this line or water will spill from the channels. Test each feature: fire the cannon, spin the current-maker, and watch the water flow. If the cannon doesn't spray, check that the nozzle is fully rotated to the open position. After testing, empty and rinse the table before first use to remove any manufacturing residue.
Product Details
- Anchors Away Pirate Ship Water Table: Interactive Water Features: Fire the water cannon, spin the current-maker, and watch water flow through multiple levels. These features are the main draw for kids, so ensure each is aligned and moves freely during assembly—tight screws can jam the cannon or spinner.
Anchors Away Pirate Ship Water Table
